Dynastar Freeride

Similar to the Powertrack models, they didn't have to change much, because what's good should stay good. Dynastar has proven for years a pioneering position in freeride skis, not for nothing do the best freeride skiers in the world, such as Aurélien Ducroz, ride Dynastar. Cham models are established and successful in the market. They have the best surfing capabilities. They owe this to highly complex and sophisticated technology, including the Powder Profile, which ensures smoothness and performance in the terrain. You'll never go down with these boards! Cham models in the range are joined by the Pro Rider model, which is ridden by Dynastar's racing team, the Factory Team.

Pro Rider

Cham 2.0 117

Cham 2.0 107

Cham 2.0 97

Cham 2.0 87

Cham 2.0 87 (Xpress)

Cham 2.0 87 (Pro Xpress)

Technologies used

Powder Profile

Powder profile is a special geometry for skis for freeride skiing. It consists of a 5-point waist, which at the same time provides very good edge grip and high maneuverability on compact snow and in powder. The long rocker on the shovel provides very good carrying capacity and the slight rocker on the tail makes the ski playful, whatever the terrain.

Paulownia wood core

Paulownia wood core reduces the weight of the ski by about 25%. Dynastar combines this wood with fiberglass developed by the racing department to ensure optimum ride and control.

Tip & Tail Rocker

Rocker with very progressive shovel limited in length and height and somewhat minimized at the end of the ski. The ski is more turn-friendly but retains its grip and performance in cut turns. The rocker also improves the buoyancy of the shovel on uneven terrain and in powder snow - an important feature for all-mountain skiing.

Tip Rocker

The ski has only a moderate rocker on the shovel. The lift is moderate so that the ski maintains contact with the snow over the entire edge length. The ski turns more easily on the flat and is more tolerant in the turns.

Binding Reinforcement

The skis are reinforced at the level of the mounting zone for the bindings to comply with the standard ISO 8364. They are therefore compatible with any binding: alpine, touring, with insert, telemark - provided that standardized screws are used.

Sandwich

The ski is made in sandwich construction and has straight sidewalls for maximum precision and performance.

Model comparison